Vending How-to Videos
How To 46: Timezone of Machine Statistics
Learn how to set the dates for the product and machine statistics to your local timezone.
How To 47: Water Pooling in Drain Pan
Learn what causes the water to pool in the drain pan and that you need to level the machine to ensure there is proper drainage.
How To 48: Unfinished App Re-Install
Learn how to get back to the file folders to complete an app install that was aborted half way through.
How To 49: Nayax Common Issues
Learn how to diagnose and resolve common Nayax credit card terminal issues on vending machines. This step-by-step guide covers essential troubleshooting procedures, including power cycling the machine, checking and reseating cables, SIM cards, and antenna connections, verifying terminal serial numbers, and reviewing key settings within the Nayax management portal. You’ll also learn how to remotely reboot the device, restore default parameters, and determine when it’s necessary to contact Nayax support. By following these procedures, operators can quickly identify and resolve many common connectivity and payment terminal issues without requiring hardware replacement.
How To 50: Inventory Alert Function
Learn how to configure low inventory notifications for your vending machine using the management portal. This guide shows you how to set custom stock warning thresholds for each product selection based on your machine’s capacity, save the settings, and monitor inventory exceptions. Once configured, you’ll receive alerts whenever product levels fall below the specified thresholds, helping you restock proactively and avoid out-of-stock situations.
How To 51: Installing Launcher + Vending App to a New Android Board
This guide walks you through replacing the Android box in your vending machine and installing the required software. You’ll learn how to download the launcher and vending app to a USB drive, safely remove and install the new Android box, install both APKs, configure the machine ID and settings, connect the machine to Wi-Fi, download product data, reset the machine password through the online dashboard if necessary, and complete the final setup to ensure the machine is fully connected and operational.